Call now 0161 496 0095

Red-brick Manchester terrace yard with half the paving freshly pressure washed

Pebbledash, render and block-paved drives

Pressure washing in Urmston, Greater Manchester

Soft washing for render, pebbledash and uPVC, plus drives, patios and roofs in Urmston. Request a quote and we confirm availability.

Call for a free quote Get my free washing quote

Written quote before any work starts
Soft wash where the surface needs it
Plain advice on brick, render and block paving

Free written quotes
Local crews
Safe soft-wash methods
Fast scheduling

Cleaning the 1930s semis and estates of Urmston

Urmston sits in Trafford, south-west of Manchester, with Flixton and Davyhulme next door. The area is full of 1930s semi-detached houses, post-war estates and bungalows, many finished in pebbledash or render, with uPVC windows, porches and conservatories.

Over time those walls gather green algae, grey grime and black streaks. Pebbledash is especially good at holding dirt, because its rough surface traps dust and moisture. Block-paved drives and patios develop the same green film. The goal is to restore the look of the house without damaging the finish or forcing water into places it should not go.

Why render and pebbledash need a soft wash

A strong jet can strip paint from render, knock stones out of pebbledash and push water through hairline cracks into the wall. Water behind render can cause damp patches inside the house later. A soft wash uses low pressure and a cleaning solution that kills algae and loosens dirt, then a gentle rinse removes it.

We also look for cracks, loose areas and blocked vents before we start, and we tell you if the finish is already failing. A wall that is flaking may need repair first. Windows, doors and air bricks are sealed or avoided as far as possible, and we rinse from the top down.

What we can do for Urmston properties

Our five services all suit Urmston homes and businesses.

House washing for pebbledash, render, brick and the uPVC trim around them.
Driveway pressure washing for block paving, imprinted concrete and tarmac drives.
Roof cleaning for concrete tiles streaked by moss and algae.
Deck and fence washing for rear garden timber and sheds.
Commercial pressure washing for shops, pubs and car parks along the main road.

Estates here often have several similar houses on the same road, so neighbours sometimes book together and share the visit.

Many houses here have a conservatory or a uPVC porch and fascias. These parts collect green algae and dust, and they are easy to damage with the wrong approach. uPVC can scuff or let water through seals if hit with a hard jet.

We use soft brushes and low pressure, rinse thoroughly and avoid abrasive products. Gutters, fascias and soffits are often cleaned in the same visit as the walls, so the house looks even. If you want gutters cleared of debris, mention it in your request, and we will include it as a separate item.

What shapes the quote for a family home

Several general factors apply:

Wall area and height, including gable ends and extensions.
Finish type. Pebbledash, smooth render and brick take different time and care.
Drive size and paving type.
Optional extras, such as joint sanding, gutter clearing or anti-algae treatment.
Access, including side gates and parked cars.

The written quote separates each item, so you can pick the combination that suits your property.

Please mention any previous paint or coating on the walls, since that affects the cleaner we select.

Getting a quote in Urmston

Use the form or call 0161 496 0095. We serve Urmston from outside it, and the request confirms availability.

Tell us the type of house and what you would like cleaned.
Send photos of each wall, the drive and any conservatory.
We ask a few questions and agree a visit if needed.
The written quote then arrives, giving a method for every surface.
After approval we choose a dry day and confirm access to the back.

A note about gates, side access and the location of the outside tap helps the crew arrive prepared.

Get a quote in Urmston

Tell us what you need and we call you back.

Step 1 of 3

No obligation.

Other areas we serve

Questions about Urmston

Will pressure washing damage my pebbledash?

A hard jet can knock stones loose and strip the finish. A soft wash with low pressure and a cleaning solution is safer. We check for loose areas first and tell you where the finish is weak, so you know what to expect before we begin. A wash should leave the finish intact, and any loose stones that fall away were already loose.

Can you clean uPVC windows and fascias?

Yes. We use soft brushes and low pressure, then rinse well. uPVC marks easily with abrasive products, so we choose mild cleaners. Heavily stained or yellowed plastic may not return to white, and we say so honestly beforehand. Window seals and gaskets are protected as far as possible during the clean.

How long will a cleaned wall stay clean?

That depends on shade, trees and rainfall. Walls in damp spots can start to green within a year or two, while sunny walls last longer. An anti-algae treatment after the wash slows regrowth, and fixing leaking gutters stops many streaks. A second, lighter clean every couple of years is common and quicker than the first.

Do you wash conservatory roofs?

Yes, using low pressure and soft brushes. Glass and polycarbonate panels collect algae and dust, and the seals can leak if sprayed too hard. We assess access and safety first, and we may recommend a different method if the roof is fragile. Roof panels are only cleaned from a safe position, never by standing on the glass.

Is it worth cleaning the drive and the house together?

Many people do, because the finished result looks more even. The same visit saves setup time, and the quote shows both items. If budget is tight, start with the area that bothers you most and book the rest later. Doing both in one visit also means the crew only needs to set up once.

Ready when you are

Call now or request a quote online.

0161 496 0095